Description
TSW200 is an industrial Ethernet switch with 2 SFP ports for long-range Fiber-optic communication and 8 Gigabit Ethernet ports that support IEEE802.af and IEE802.3at Power-over-Ethernet standards. Classified as power source equipment (PSE), it enables the centralization of the power supply, providing up to 30 watts per port and reducing the effort to install power.
-
ETH
8 x ETH ports, 10/100/1000 Mbps, supports auto MDI/MDIX crossover
-
Fibre
2 x SFP ports
-
IEEE 802.3 series standards
802.3i, 802.3u, 802.3ab, 802.3x, 802.3az
-
PoE ports
Port 1 - 8
-
PoE standards
802.3af and 802.3at Alternative B
-
PoE Max Power per Port (at PSE)
30 W
-
Total PoE Power Budget (at PSE)
240 W
-
Bandwidth (Non-blocking)
20 Gbps
-
Packer buffer
128 KB
-
MAC address table size
2K entries
-
Jumbo frame support
9216 bytes
-
Connector
2-pin industrial DC power socket
-
Input voltage range
7 – 57 VDC
-
PoE-out input voltage range
44 – 57 VDC
-
Power consumption
Idle: 1.81 W / Max: 5.5 W / PoE Max: 245.5 W
-
Ethernet
8 x RJ45 ports, 10/100/1000 Mbps
-
Fibre
2 x SFP ports
-
Status LEDs
1 x Power LED, 16 x ETH status LEDs 2 x SFP status LEDs
-
Power
1 x 2-pin industrial DC power socket
-
Other
1 x Grounding screw
-
Casing material
Full aluminum housing
-
Dimensions (W x H x D)
132 x 44.2 x 95.1 mm
-
Weight
517 g
-
Mounting options
Integrated DIN rail bracket, wall mount, flat surface (additional kit needed)
-
Operating temperature
-40 °C to 75 °C
-
Operating humidity
10% to 90% non-condensing
-
Ingress Protection Rating
IP30
-
Regulatory
CE, UKCA, CITC, ANRT, FCC, IC, CB
-
Standards
EN 55032:2015 + A1:2020
EN 55035:2017 + A11:2020
EN IEC 61000-3-2:2019 + A1:2021
EN 61000-3-3:2013 + A1:2019
-
ESD
EN 61000-4-2:2009
-
Radiated Immunity
EN IEC 61000-4-3:2020
-
EFT
EN 61000-4-4:2012
-
Surge Immunity (AC Mains Power Port)
EN 61000-4-5:2014 + A1:2017
-
CS
EN 61000-4-6:2014
-
DIP
EN IEC 61000-4-11:2020
-
Standards
IEC 62368-1:2018
EN IEC 62368-1:2020+A11:2020