Description
This unique module opens up a whole world of high speed connectivity possibilities, offering up to 10 Gbps speeds over regular familiar twisted-pair cables in your existing products that have SFP+ ports. Any MikroTik device with active cooling that has SFP+ ports can now be used without installing any optical fiber, just plug the S+RJ10 and your network can be upgraded to 10 Gbps, making it ready for the next generation of RJ45 hardware.
S+RJ10 module is supported also on devices with passive cooling, but may require an extra cooling.
New revision of S+RJ10 comes with several improvements:
- Jumbo frames up to 10218 Bytes are now supported;
- Link speed reporting is fixed - actual link speed in the interface menu is listed. Previously 100M/1G/2.5G/5G link speeds were not reported correctly;
- DDM monitoring (Supply Voltage, Module temperature) is now supported.
Product specifications
| Details | |
|---|---|
| Product code | S+RJ10 |
| Connector | RJ45 |
| Data Rate | 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, 10 Gbps |
| Distance | up to 200m |
| MTBF | Approximately 100'000 hours at 25C |
| Size of RAM | 0 KB |
| Storage size | 256 KB |
| Storage type | FLASH |
| Tested ambient temperature | -20°C to 60°C |
1 Review
-
Works but gets really hot
Got this to keep some existing Ethernet infrastructure at 10GB. Plug and play in multiple Mikrotik devices. Check their transceiver compatibility list. In researching it, I read it got very got, 80-90+C. Mine got up to 80C and was climbing. I found some small heatsinks recommended in a Mikrotik forum page. Applied them and the temps are stable between 60-70C. This for short distances, no more than 10m, but they use a lot of power. They work great and provide a full 10GB.
Related Products
Mikrotik S-C59DLC40D
Mikrotik
Mikrotik S+AO0005
Mikrotik
Mikrotik S-C47DLC40D
Mikrotik
Mikrotik S-C49DLC40D
Mikrotik
Mikrotik S-4554LC80D
Mikrotik
Mikrotik hEX S
Mikrotik
Mikrotik S-C55DLC40D
Mikrotik
Mikrotik S+85DLC03D
Mikrotik
Mikrotik S-C61DLC40D
Mikrotik