null
Mikrotik

Mikrotik CRS310-8G+2+IN Ethernet Switch

(1 review) Write a Review
SKU:
CRS310-8G+2S+IN
MPN:
CRS310-8G+2S+IN
  • Mikrotik CRS310-8G+2+IN Ethernet Switch
  • Mikrotik CRS310-8G+2+IN Ethernet Switch
  • Mikrotik CRS310-8G+2+IN Ethernet Switch
$190.00

Description

The world of networking is on the move. Even small offices are shifting from Gigabit connections to the lightning-fast realm of 2.5 Gigabit connectivity. With CRS310-8G+2S+IN, we aim to give you the tools to outpace your competition with a strong combination of eight 2.5 Gigabit Ethernet ports and two 10 Gigabit SFP+ ports in a compact, powerful package! Furthermore, these SFP+ cages support multiple data rates: 1G, 2.5G, and 10G. So you can use this switch as a 10x 2.5G switch, if needed. Classic MikroTik flexibility!

The amazing Marvell 98DX226S switch-chip and integrated dual-core ARM CPU can handle the full potential of RouterOS v7. Run VLANs, Jumbo frames, link aggregation, ACL rules, and so much more! You can even do some hardware offloaded Layer-3 routing.

There are multiple mounting options. You can easily install the CRS310-8G+2S+IN in a standard 19” rack using the provided rackmount ears. Another option is to get the RMK-2/10 accessory set, which allows you to mount two CRS310 units within the same 1U 19” rack space or mount it in a 10” rack. The choice is yours!

Specifications

Details
Product code CRS310-8G+2S+IN
Architecture ARM 32bit
CPU 98DX226S
CPU core count 2
CPU nominal frequency 800 MHz
Switch chip model 98DX226S
RouterOS license 5
Operating System RouterOS v7
Size of RAM 256 MB
Storage size 32 MB
Storage type FLASH
MTBF Approximately 200'000 hours at 25C
Tested ambient temperature -40°C to 60°C

Powering

Details
Number of DC inputs 1 (DC jack)
DC jack input Voltage 18-57 V
Max power consumption 34 W
Max power consumption without attachments 21 W
Cooling type 1 fan
 

Ethernet

Details
Number of 2.5G Ethernet ports 8
 

Fiber

Details
SFP+ ports 2
 

Peripherals

Details
Number of USB ports 1
USB Power Reset Yes
USB slot type USB type A
Max USB current (A) 1
 

Other

Details
CPU temperature monitor Yes
PCB temperature monitor Yes
 

Certification & Approvals

Details
Certification CE, EAC, ROHS
IP 20
 
 

Included parts

View AllClose

1 Review

  • 4
    Good but check the insides

    Posted by Rob S on Feb 25th 2024

    Got this for 10GB uplinks and the 2.5GB ports to support faster devices. After seeing a review I decided to open up the device. As in the review I saw, one of the heat sinks had fallen off. It's only on with tape. So, I pressed it back on and replaced the fan so it would be quieter. SPF+ works great at 2.5GBe with S+RJ10 transceiver, but it will get hot. Also, the switch allows you to switch from RouterOS to SWOS. Do not do it. It'll freeze up the router as it's not supported. After some digging I found this out, and resetting the router restored it. Switch works fine, but the heat sink falling off and allowing an option that should not be done which freezes the router knocks off a star.

View AllClose