null
EATON

Eaton Tripp Lite series SmartPro 208 & 120V 5kVA 4kW Line-Interactive Sine Wave UPS, 6U, Extended Run, Network Card Options, USB, DB9

(No reviews yet) Write a Review
SKU:
SMART5000RT3U
MPN:
SMART5000RT3U
  • Eaton Tripp Lite series SmartPro 208 & 120V 5kVA 4kW Line-Interactive Sine Wave UPS, 6U, Extended Run, Network Card Options, USB, DB9
  • Eaton Tripp Lite series SmartPro 208 & 120V 5kVA 4kW Line-Interactive Sine Wave UPS, 6U, Extended Run, Network Card Options, USB, DB9
  • Eaton Tripp Lite series SmartPro 208 & 120V 5kVA 4kW Line-Interactive Sine Wave UPS, 6U, Extended Run, Network Card Options, USB, DB9
$7,680.00

Please contact for availability

Frequently bought together:

Description

Overview

The line-interactive SMART5000RT3U UPS System protects server, networking or telecommunications equipment from blackouts, voltage fluctuations and surges in a compact tower/rack-mount housing. In rack configuration, the power module and battery pack occupy only 3U each. Large-capacity 5000VA/4000W power module converts raw 208V AC input to fully regulated dual-output 208/120 voltage for simultaneous protection of both high- and low-voltage equipment loads. True sine wave output at all times offers guaranteed compatibility with all equipment types. Includes 14 outlets, eight of which can be individually reset via software interface to selectively reboot remote equipment or shed less critical loads to extend battery runtime for more critical equipment. Battery support can be extended indefinitely with additional external 3U rack-mount battery packs. Includes slot for internal Network Management Card option. Also includes two DB9 and two USB enhanced monitoring ports for unattended shutdown, remote control and monitoring of UPS system and power data.

 

Specifications

OVERVIEW
UPC Code 037332099242
UPS Type Line-Interactive
INPUT
Input Phase Single-Phase
Rated input current (Maximum Load) 24A max. in factory L6-30P configuration; 27A max. when powered by 50A plug or hardwire input
Nominal Input Voltage(s) Supported 208V AC
UPS Input Connection Type L6-30P
Input Circuit Breakers 30A double-pole
UPS Input Cord Length (ft.) 10
Recommended Electrical Service 30A 208V
Maximum Input Amps 24
OUTPUT
Output Capacity (VA) 5000
Output Capacity (kVA) 5
Output Capacity (Watts) 4000
Output Capacity (kW) 4
Output Capacity Details Maximum output increases to 4800W when hardwire or user-supplied 50A rated input plug is used
Power Factor   0.8
Nominal Voltage Details 208/120V nominal output in battery mode
Frequency Compatibility 60 Hz
Output Voltage Regulation (Line Mode) 208 & 120V (-10% / +10%)
Output Voltage Regulation (Battery Mode) +/- 5%
Load Management Receptacles   Eight switchable single-outlet 5-15R load banks
Output Circuit Breakers 15A branch rated (x3) - 2 breakers support 5 5-15R outlets each, one breaker supports 2 5-20R outlets, L6-30R and L14-30R outlets are unbreakered
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery Mode) Pure Sine wave
Nominal Output Voltage(s) Supported 110V; 115V; 120V; 208V
Output Receptacles (10) 5-15R; (2) 5-15/20R; (1) L14-30R; (1) L6-30R
Individually Controllable Load Banks   Yes
BATTERY
Battery Type Valve Regulated Lead Acid (VRLA)
Runtime Full Load (min.)   16 min. (4000W)
Runtime Half Load (min.)   38 min. (2000W)
Expandable Runtime Yes
External Battery Pack Compatibility    BP48V24-2U  (limit 1); BP48V60RT-3U (multi-pack compatible);  BP48V27-2US  (multi-pack compatible)
DC System Voltage (VDC) 48
Battery Recharge Rate (Included Batteries) Less than 4 hours from 10% to 90% (typical, full load discharge)
Battery Replacement Description Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 151 to 260
Overvoltage Correction   Input voltages between 240V and 260 are reduced by 12%
Undervoltage Correction   Input voltages between 180V and 199 are boosted by 12%
Severe Undervoltage Correction Input voltages between 151V and 179 are boosted by 24%
USER INTERFACE, ALERTS & CONTROLS
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
Alarm Cancel Operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
Audible Alarm Audible alarm indicates power-failure, overload and low-battery conditions
LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
SURGE / NOISE SUPPRESSION
EMI / RFI AC Noise Suppression   Yes
AC Suppression Joule Rating   1020
AC Suppression Response Time   Instantaneous
PHYSICAL
Primary Form Factor Rackmount
Rack Height   6U
Cooling Method Fans
Included Battery Pack Dimensions (hwd / in.) 5.2 x 17.5 x 25
Included Battery Pack Weight (lbs.) 163
Installation Form Factors Supported with Included Accessories 4 post 19 inch rackmount
Installation Form Factors Supported with Optional Accessories 2 post rackmount ( 2POSTRMKITHD ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND )
Minimum Required Rack Depth (inches) 3
Minimum Required Rack Depth with External Battery Pack (cm) 75
Minimum Required Rack Depth with External Battery Pack (in.) 29.5
Minimum Required Rack Depth without External Battery Pack (cm) 72
Minimum Required Rack Depth without External Battery Pack (in.) 28.25
Optional Mounting Accessory Notes Optional  2-9USTAND  enables upright tower UPS placement (1 required);  2POSTRMKITHD  enables 2-post rackmount installation (2 required);  4POSTRAILKITWM  enables installation in 4-post short-depth racks from 14.5 to 23.5 inches (368 to 597mm, requires 2)
Primary UPS Depth (mm) 572
Primary UPS Height (mm) 132
Primary UPS Width (mm) 445
Shipping Dimensions (hwd / in.) 24.50 x 24.00 x 34.00
Shipping Weight (lbs.) 321.62
Unit Dimension Details Includes 3U UPS/power module and 3U external battery pack
UPS Housing Material Steel
UPS Power Module Dimensions (hwd, in.) 5.2 x 17.5 x 22.5
UPS Power Module Weight (kg) 42.18
UPS Power Module Weight (lbs.) 93
Unit Weight (lbs.) 321.62
Mounting Details Set of two included 4POSTRAILKIT mounting brackets enables installation of UPS and Battery Pack in 4 post racks from 20.5 to 36 inches (521 to 914mm)
ENVIRONMENTAL
Operating Temperature Range 32° to 104°F (0° to 40°C)
Storage Temperature Range 5° to 122°F (-15° to 50°C)
Relative Humidity 0-95% non-condensing
AC Mode Efficiency Rating (100% Load) 94%
Battery Mode Heat Dissipation (BTU/Hr) @ Full Load   1518
Audible Noise 45 dBA maximum, front side 1m
COMMUNICATIONS
Network Management Cards  WEBCARDLXE 
Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions; 2 USB ports, 1 DB9 serial and 1 DB9 contact closure port (4 total)
PowerAlert Software For local monitoring via the UPS’s built-in communication ports, download PowerAlert software at https://tripplite.eaton.com/products/power-alert
Communications Cable USB and DB9 cabling included
WatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
Network Management Card Description Network management card optional
Communications Interface Contact closure; DB9 Serial; USB
LINE / BATTERY TRANSFER
Transfer Time   2-4 milliseconds
Low Voltage Transfer to Battery Power (Setpoint) 151
High Voltage Transfer to Battery Power (Setpoint) 260
FEATURES & SPECIFICATIONS
Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported
High Availability UPS Features   Automatic Voltage Regulation (AVR); Hot swappable batteries; Surge/noise protection
Grounding Details Back panel grounding lug
APPLICATIONS
UPS Applications Large Network
STANDARDS & COMPLIANCE
Product Certifications CSA (Canada); NOM (Mexico); UL 1778
Product Compliance RoHS; FCC Part 15 Class A (USA)
 
View AllClose

Related Products

Related Products

Cyber Power 1500VA/1500W SINE WAVE UPS Cyber Power 1500VA/1500W SINE WAVE UPS
Add to Cart
Quick view

Cyber Power 1500VA/1500W SINE WAVE UPS

Cyber Power

$1,417.00
The PR1500RTXL2UCN is a Smart App Sinewave rack/tower convertible UPS with line-interactive topology, surge protection, and battery backup. CyberPowers Smart App Sinewave series has sine wave output...