24× PoE+ 10/100 Mbps RJ45 ports, 2× Gigabit RJ45 ports, and 2× combo Gigabit SFP slots High PoE power budget with up to 30 W for each PoE port and 250 W for all PoE ports* Up to 250 m data and power PoE transmission range under...

24 10/100/1000Mbps RJ45 PoE+ ports switch with 2 Ethernet copper and  2 SFP fiber uplink ports PoE power budget is up to 250 W*, making it ideal for small to medium business surveillance systems Priority Mode helps to guarantee the...

10G Lightning-Fast Uplink: 4× 10 Gbps SFP+ slots enable high-bandwidth connectivity and non-blocking switching capacity. Learn More about TP-Link 10G/Multi-Gigabit Switching Solutions Gigabit Speeds: 24× gigabit RJ45...

120 W PoE Budget: 8× 802.3at/af-compliant PoE+ ports with a total power supply of 120 W*. Full Gigabit Ports: 8× gigabit PoE+ ports and 8× gigabit non-PoE ports provide high-speed connections. Integrated into Omada SDN:...

150 W PoE Budget: 16× 802.3at/af-compliant PoE+ ports with a total power supply of 150 W*. Full Gigabit Ports: 16× gigabit PoE+ ports and 2× gigabit SFP Slots provide high-speed connections. Integrated into Omada SDN: Zero-Touch...

384 W PoE Budget: 48× 802.3at/af-compliant PoE+ ports with a total power supply of 384 W*. Full Gigabit Ports: 48× gigabit RJ45 ports and 4× gigabit SFP Slots provide high-speed connections. Integrated into Omada SDN:...

Two 2.5G Ports: 1× 2.5G WAN and 1× 2.5G WAN/LAN ports provide high-bandwidth aggregation connectivity. Up to 6 WAN Ports: 2.5G RJ45, gigabit Fiber, and gigabit RJ45 WAN ports with load balance raise the utilization rate of multi-line...

PTP 820 is a point-to-point licensed microwave backhaul platform that integrates leading networking functionality with the industry’s most advanced microwave technologies creating a superior microwave transport solution.Supporting licensed...

DC 930W total power, 37V - 60V, includes 1.5 m cable connector

DC Surge Suppressor (DC LPU kit) with 2x 4-pin power connectors

POWER SUPPLY FOR CMM4, 54V, HLG-240H-54C NOTE: When powering PMP 450i AP devices, a crossover cable must be used, or Cambium dongle N000045L001A may also be used (PMP 450i devices require pins 8,7 +Vcc and pins 4, 5 DC return).

PTP 550 SFP Single Mode Optical 1000BaseLX SFP Interface per ODU. PTP 550 has an SFP port and does not require any special license and to enable it. The option to enable is present in the Radio under (Configuration > Network > SFP Port).