Altronix T3MK75F16D 16-Door Altronix/Mercury Access and Power Integration Kit - Trove3M3 with eFlow102NB, eFlow104NB, 2-ACM8CB, PD8ULCB, RSB2

Altronix T3MK75F16D kit consists of Trove3 enclosure and TM3 Mercury/Altronix backplane with 24VDC @ 10A and 12VDC @ 10A power supply/chargers, eight (8) PTC protected output power distribution module and two eight (8) PTC protected output access control modules. This kit also accommodates various combinations of Mercury boards for up to sixteen (16) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.
*Compatible with these authentic Mercury partners:
AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls, Kastle, Keri Systems, Lenel/S2, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic Video Insight, Quintron, RS2, Schneider Electric, Vanderbilt

Specifications

• eFlow104NB Power Supply/Charger - 1

  • Input

    • Voltage: 120VAC, 60Hz, 4.5A max.
    • Main Fuse: 6.3A / 250V.

  • Output

    • Voltage: 24VDC @ 10A.
    • Auxiliary: 1A (unswitched).
    • Protection: Overvoltage protection. Filtered and regulated.

• eFlow102NB Power Supply/Charger - 2

  • Input

    • Voltage: 120VAC, 60Hz, 3.5A max.
    • Main Fuse: 5A / 250V.

  • Output

    • Voltage: 12VDC @ 10A.
    • Auxiliary: 1A (unswitched).
    • Protection: Overvoltage protection. Filtered and regulated.

• Both Power Supplies

  • Battery Charging

    • Capacity 12VDC/12AH (2 within enclosure); 40AH/65AH (requires separate enclosure)
    • Type: Sealed lead acid or gel type
    • Failover: Upon AC loss, instantaneous
    • (Batteries are sold separately).

  • Fire Alarm Disconnect

    • Supervised: Latching or non-latching.
    • EOL: 10K Resistor.

  • Supervision

    • AC Failure: Form “C” contacts.
    • Battery: Form “C” contacts.
    • Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.

  • Indicators LED

    • AC Input: 120VAC is present.
    • DC Output: Powered.
    • Battery: Discharged or not connected.

• Two (2) ACM8CB Access Power Controllers

  • Input

    • Voltage: 24VDC from eFlow104NB.
    • Main Fuse: 10A / 250V.

  • Outputs

    • Class 2 power-limited auto-resettable outputs.
    • Voltage: 24VDC.
    • Eight (8) 24VDC independently controlled PTC outputs:
    • a) Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A.
    • b) Any combination of the above.
    • Output PTCs: 2.5A.

  • Indicators (LED)

    • Red LEDs: Outputs are triggered (relays energized).
    • Green LED: FACP disconnect is triggered.

• PD8ULCB Power Distribution Module

  • Input

    • Voltage: 12VDC from eFlow102NB.

  • Outputs

    • Class 2 power-limited auto-resettable outputs.
    • Voltage: 12VDC.
    • PTCs: 2.5A.

  • Indicators LED

    • Green LED: DC Output.

• Environmental

  • Temperature

    • Operating: 0° C to 49° C (32° F to 120° F).
    • Storage: - 20° C to 70° C ( - 4° F to 158° F).

  • Relative Humidity

    • Relative Humidity: 85% +/- 5%.

  • BTU/Hr. (approx.):

    • 217 BTU/Hr.