Altronix PACE1PRMT Long Range Ethernet Single Port Adapter Kit, 100Mbps, Passes PoE/PoE+, Includes Receiver & Transceiver

Pace1PRMT is a long range Ethernet adapter kit which transmits data at 100Mbps full duplex and power via a single twisted pair (UTP) or Cat5e or higher cable in a PoE(+) compliant format. The Pace1PRM receiver is powered via a PoE midspan such as the Altronix Netway series or by an endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) or structured cable.

Specifications

• Input

  • Pace1PRM:

    • Powered by midspan or endspan. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W).

•  

  • Pace1PTM:

    • Powered by Pace1PRM.

• Ethernet

  • Connectivity: RJ45, auto-crossover.
  • Wire type: 4-pair CAT5 or 1 pair UTP structured cable.
  • Distance: up to 500m (1,600 ft.).
  • Speed: 10/100BaseT, half/full duplex, auto negotiation. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1PTM. Power provided by Pace1PRM to Pace1PTM by PoE protocol.
  • Throughput is rated to pass 100Mbps of data at distances up to 500m (1,600 ft.)

• CAT5e or higher

  • Distance: up to 500m (1,600 ft.) @ 100Mbps.

• UTP (single pair)

  • Distance: up to 152m (500 ft.) @ 100Mbps.

• LED Indicators

  • Pace1PRM/Pace1PTM: Green - PoE ON (by respective RJ45 jack).
  • Pace1PRM and Pace1PTM (RJ45 jack): Yellow and Green LED IP Link status, 10/100Base-T/active.

• Temperature

  • Operating Temperature:

    • Pace1PRM:
    • - 20ºC to 49ºC (-- 4ºF to 120.2ºF).
    • Pace1PTM:
    • 15W: - 40ºC to 75ºC ( - 40ºF to 167ºF)
    • 25W: - 40ºC to 70ºC ( - 40ºF to 158ºF)
    • 30W: - 40ºC to 60ºC ( - 40ºF to 140ºF)

•  

  • Storage Temperature:

    • -40ºC to 75ºC (-40º to 167ºF).
    • Relative humidity: 85%, +/- 5%, non-condensing.

• Operating Altitude

  • - 304.8 to 2,000m.

• Functions

  • Auto detection and protection of legacy non-PoE cameras/devices.