Altronix EFLOW6NB Power Supply Charger, Single Output, 12/24VDC @ 6A, Aux Output, FAI, LinQ2 Ready, 115VAC, Board

Altronix eFlow6NB UL Listed Sub-Assembly power supply/charger converts a 120VAC, 60Hz input into a single 12VDC or 24VDC output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

• Input

  • Voltage: Input 120VAC 60Hz, 3.5A.
  • Input Fuse: 5A/250V
  • Removable AC input terminal block to facilitate installation and wiring.

• Outputs

  • Voltage: 12VDC or 24VDC selectable output.
  • Current: 6A continuous supply current.
  • Auxiliary: Power-limited @ 1A (unswitched).
  • Other: Overvoltage protection.
  • Filtered and electronically regulated outputs.

• Battery Charging

  • Type: Sealed lead acid or gel type.
  • Battery Fuse: 10A/32V.
  • Failover: Upon AC loss, instantaneous.
  • (Batteries are sold separately).

• Fire Alarm Disconnect

  • Supervised: Latching or non-latching.
  • EOL: 10K Resistor.

• Supervision

  • AC Failure: Form "C" contacts.
  • Battery: AC Failure Form "C" contacts.
  • Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply)
  • Prevents deep battery discharge

• Indicators (LED)

  • Input: 120VAC is present.
  • DC Output: Powered.

• Electrical

  • Temperature:

    • Operating: 0° C to 49° C (32° F to 120° F).
    • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity: 85% +/- 5%.

  • BTU/Hr. (approx.):

    • 12VDC: 37 BTU/Hr.
    • 24VDC: 74 BTU/Hr.