Altronix EBRIDGE100ST EoC Single Port Small Transceiver, 100Mbps, Passes PoE/PoE+, Requires Compatible Receiver

Altronix eBridge100ST EoC hardened transceiver transmits data at 100Mbps, Full Duplex over Coax cable to a paired eBridge receiver and provides power in a PoE/PoE+ compliant format to an enabled device/camera. The eBridge receiver is available in various options and is powered by an external midspan or endspan. The receiver passes PoE/PoE+ power over the same coax cable to the eBridge100ST transceiver, which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate a cost-effective, simple way to replace legacy analog products with new IP devices over existing coax up to 300m.

Specifications

• Compatible Receivers

  • eBridge100RM, eBridge400PCRM,
  • eBridge800PCRM, and eBridge1600PCRM.
  • eBridge800E
  • Visit www.altronix.com for the latest compatibility list.

• Input

  • Operating power provided by eBridge receiver.
  • Current draw: 1.5W
  • PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) from eBridge receivers.*

• Coax link

  • Throughput is rated to pass 100Mbps of data at distances up to 300m.for power delivery.
  • Connectivity: BNC, RG-59/U or similar.

• Ethernet

  • Connectivity: RJ45, auto-crossover.
  • Wire type: 4-pair CAT5.
  • Distance: up to 100m.
  • Speed: 10/100BaseT, half/full duplex, auto negotiation.

• LED Indicators

  • Green - PoE ON (by respective RJ45 jack).
  • Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active.
  • Blue: Coax Link is active.

• Temperature

  • Operating Temperature:

    • For 15W: - 40° C to 75° C ( - 40° F to 167° F).
    • For 30W: - 40° C to 60° C ( - 40° F to 140° F).

•  

  • Storage Temperature:

    • - 40° C to 75° C ( - 40° F to 167° F).
    • Relative Humidity: 85% +/-5%.

• Operating Altitude

  • - 304.8 to 2,000m (-1000 to 6,561.679 ft.).

• Functions

  • Auto detection and protection of legacy non-PoE cameras/devices.