Altronix AL125ULP Access Control Power Supply Charger, 2 PTC Class 2 Outputs, 12/24VDC @ 1A, 24VAC, BC100 Enclosure, includes Plugin Transformer

AL125ULP is a Two (2) Output Switching Power Supply/Charger that converts a 24VAC @ 40VA input, into two (2) individually PTC protected 12VDC or 24VDC outputs.

Specifications

• Input

  • 24VAC, 40VA from UL Listed, Class 2 transformer.
  • Access control trigger input.

• Output

  • 12VDC @ 1A or 24VDC @ 0.5A selectable outputs.
  • Two (2) Class 2 Rated power limited outputs.
  • Fail-Safe/Fail-Secure lock output (switched).
  • Auxiliary power output (unswitched).
  • PTC protected outputs, rated @ 2.5A.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.

• Battery Charging

  • Built-in charger for sealed lead acid or gel type batteries.
  • Maximum charge current: 400mA.
  • Automatic switch over to stand-by battery when AC fails.
  • (Batteries are sold separately).

• Supervision

  • Supervised Fire Alarm Disconnect (Latching w/reset or Non-Latching).

• Indicator (LED)

  • Unit Status: Normal / No Output / Loss of AC / Triggered.

• Temperature

  • Operating: 0° C to 49° C (32° F to 120° F).
  • Storage: - 20° C to 70ºC ( - 4° F to 158° F).
  • Relative Humidity: 85% +/- 5%.

  • BTU/Hr. (approx.):

    • 12VDC: 6 BTU/Hr.
    • 24VDC: 6 or 12 BTU/Hr.
  • System AC input VA requirement: 55.2VA.

• Features

  • Includes power supply, plug-in transformer, enclosure and battery leads.