Altronix AL125UL Access Control Power Supply Charger, 2 PTC Class 2 Outputs, 12/24VDC @ 1A, 115VAC, BC100 Enclosure

Altronix AL125UL Series power-limited Power Supply/Chargers convert 115VAC 50/60Hz input into two individually PTC protected 12VDC or 24VDC outputs (see specifications). They are intended for use in applications requiring UL Listing for Access Control (UL294) and applications requiring an interface with Fire Alarm Control Panels.

Specifications

• Input

  • Input 115VAC, 50/60Hz, 0.5A.
  • Access control trigger input.

• Output

  • 12VDC or 24VDC selectable outputs.
  • 1A supply current.
  • Two (2) Class 2 Rated power limited outputs.
  • Fail-Safe/Fail-Secure lock output (switched).
  • Auxiliary power output (unswitched).
  • PTC protected outputs, rated @ 2.5A.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.

• Battery Charging

  • Built-in charger for sealed lead acid or gel type batteries.
  • Maximum charge current: 400mA.
  • Automatic switch over to stand-by battery when AC fails.
  • (Batteries are sold separately).

• Supervision

  • Supervised Fire Alarm Disconnect (Latching w/reset or Non-Latching).

• Indicator (LED)

  • Unit Status: Normal / No Output / Loss of AC / Triggered.

• Temperature

  • Operating: 0° C to 49° C (32° F to 120° F).
  • Storage: - 20° C to 70ºC ( - 4° F to 158° F).
  • Relative Humidity: 85% +/- 5%.

  • BTU/Hr. (approx.):

    • 12VDC: 6 BTU/Hr.
    • 24VDC: 6 or 12 BTU/Hr.
  • System AC input VA requirement: 55.2VA.