Altronix AL1024ULXPD4 Power Supply Charger, 4 Fused Outputs, 24VDC @ 10A, 115VAC, BC400 Enclosure

AL1024ULXPD4 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into four (4) 24VDC non power-limited outputs.

Specifications

• Input

  • Input 115VAC, 60Hz, 4.2A.
  • Input fuse rated @ 3.5A/250V.

• Output

  • 24VDC output.
  • 10A of continuous supply current for Access Control applications.
  • 8A of continuous supply current for Fire Alarm applications.
  • Four (4) fuse protected outputs.
  • Output fuses are rated @ 3.5A/250VAC.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.

• Battery Charging

  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
  • Maximum charge current: 3.6A.
  • Zero voltage drop when switched over to battery backup.
  • (Batteries are sold separately).

• Supervision

  • AC fail supervision (form "C" contacts).
  • Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
  • Low battery supervision (form "C" contacts).
  • Battery presence supervision (form "C" contacts).

• Visual Indicators

  • AC input and DC output LED indicators.

• Temperature

  • Operating: 0 to 49° C (32 to 120° F ).
  • Storage: - 20 to 70° C ( - 4 to 158° F).
  • Relative Humidity: 85% +/- 5%
  • BTU/Hr. (approx.): 123 BTU/Hr.
  • System AC input VA requirement: 483VA.